Table of Contents
Advertisement
Parent topic:
Selecting Wireless Network Settings from the Control Panel
You can select or change wireless network settings using your product control panel.
To install your product on a wireless network, follow the instructions on the Start Here sheet and install
the necessary software by downloading it from the Epson website. The installer program guides you
through network setup.
Note: Breakdown or repair of this product may cause loss of network data and settings. Epson is not
responsible for backing up or recovering data and settings during or after the warranty period. We
recommend that you make your own backup or print out your network data and settings.
1. Press the
2. Select the
3. Select Router.
4. Select Start Setup, Change Settings, or Change to Wi-Fi Connection.
5. Select Wi-Fi Setup Wizard.
6. Select the name of your wireless network or select Enter Manually to enter the name manually. Use
the displayed keypad to enter your network name.
7. Select the Enter Password field and enter your wireless password using the displayed keypad.
Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and
lowercase letters, and numeric or special characters.
• To move the cursor, select the left or right arrows.
• To change the case of letters, select
• To delete the previous character, select
• To enter numbers and symbols, select 123#.
• To enter a space, select
8. Select OK when you finish entering your password.
Wi-Fi or Wired Networking
home button, if necessary.
icon and press the OK button.
.
.
.
49
Advertisement
Table of Contents
