Table of Contents
Advertisement
Bonjour Settings
Setting
Use Bonjour
Bonjour Name
Bonjour Service Name
Location
Top Priority Protocol
Wide-Area Bonjour
iBeacon Settings
Setting
Enable iBeacon Transmission
SLP Settings
Setting
Enable SLP
WSD Settings
Setting
Enable WSD
Printing Timeout (sec)
Scanning Timeout (sec)
Device Name
Location
Options/Description
Search for or use devices through Bonjour
Displays the Bonjour name
Displays the Bonjour service name
Displays the Bonjour location name
Selects the protocol that is the top priority for Bonjour printing
Enables the Wide-Area Bonjour protocol; register all products
on the DNS server to locate them over the segment
Options/Description
Enable the iBeacon transmission function
Options/Description
Enable the SLP function to use the Push Scan function and
network searching in EpsonNet Config
Options/Description
Enable adding devices using WSD, and printing and scanning
from the WSD port
Enter the communication timeout value for WSD printing
between 3 and 3,600 seconds
Enter the communication timeout value for WSD scanning
between 3 and 3,600 seconds
Displays the WSD device name
Displays the WSD location name
201
Advertisement
Table of Contents
