Powering Off Or Rebooting The Product Remotely; Restoring Default Product Settings; Configuring Security Settings - Epson WorkForce Pro WF-M5399 User Manual

Powering Off or Rebooting the Product Remotely

You can power off or reboot the product using the Web Config interface.
1. Log in to the Web Config interface as an administrator.
2. Select the Device Management tab, then select the Power setting.
3. Select a power option from the drop down menu and select Execute.
Note: After turning off the product, you cannot access Web Config until the product is turned on again.
Parent topic:
Related tasks
Accessing the Web Config Utility

Restoring Default Product Settings

You can reset the product to the default settings using the Web Config interface.
1. Log in to the Web Config interface as an administrator.
2. Select the Device Management tab, then select the Restore Default Settings setting.
3. Select an option from the drop-down list. You can either restore network settings or all data and
settings.
4. Select Execute and confirm your selection to restore the product settings.
Parent topic:
Related tasks
Accessing the Web Config Utility

Configuring Security Settings

Follow the instructions in these sections to configure internal security features for your product using the
Web Config software.
Connecting an Authentication Device
Restricting Features Available for Users
Disabling the External Interface
Setting Up Password Encryption
Working with Audit Logs
Restricting PDL File Operations
Configuring Product Settings
Configuring Product Settings
194