Table of Contents
Advertisement
March 2020
Markings:
E6 Canada Explosion-Proof, Dust Ignition Proof
Certificate: 2041384
Standards: CAN/CSA C22.2 No. 0-10, CSA Std C22.2 No. 25-1966, CSA
Markings:
I6 Canada Intrinsic Safety
Certificate: 2041384
Standards: CSA Std. C22.2 No. 142 - M1987, CSA Std. C22.2 No. 213 -
Markings:
9.4
Europe
E1 ATEX Flameproof
Certificate: KEMA 08ATEX0090X
Standards: EN60079-0:2006, EN60079-1:2007, EN60079-26:2007
Markings:
Special Conditions for Safe Use (X):
1. The Ex d blanking elements, cable glands and wiring needs to be
suitable for a temperature of 90 °C.
2. This device contains a thin wall diaphragm. Installation, maintenance
and use shall take into account the environmental conditions to
Quick Start Guide
IS CL I, DIV 1, GP A, B, C, D when connected per Rosemount
drawing 02051-1009 (–50 °C ≤ T
Std C22.2 No. 30-M1986, CAN/CSA-C22.2 No. 94-M91, CSA
Std C22.2 No.142-M1987, CAN/CSA-C22.2 No.157-92, CSA
Std C22.2 No. 213-M1987, CAN/CSA-E60079-0:07, CAN/CSA-
E60079-1:07, CAN/CSA-E60079-11-02, CAN/CSA-C22.2 No.
60529:05, ANSI/ISA-12.27.01–2003
Explosion-Proof for Class I, Divisions 1, Groups B, C, and D.
Dust-Ignition Proof for Class II and Class III, Division 1, Groups
E, F, and G. Suitable for Class I, Division 2; Groups A, B, C, and
D for indoor and outdoor hazardous locations. Class I Zone 1
Ex d IIC T5. Enclosure type 4X, factory sealed. Single Seal
M1987, CSA Std. C22.2 No. 157 - 92, CSA Std. C22.2 No. 213
- M1987, ANSI/ISA 12.27.01 – 2003, CAN/CSA-E60079-0:07,
CAN/CSA-E60079-11:02
Intrinsically safe for Class I, Division 1, Groups A, B, C, and D
when connected in accordance with Rosemount drawing
02051-1008. Ex ia IIC T3C. Single Seal. Enclosure Type 4X
II 1/2 G Ex d IIC T6 IP66 (–50 °C ≤ T
IIC T5 IP66 (–50 °C ≤T
≤ +60 °C); Type 4x
a
≤ 65 °C);
a
≤ 80 °C)
a
Quick Start Guide
II 1/2 G Ex d
27
Advertisement
Table of Contents
