Power Supply Adapter And Cable With A Rechargeable Clip; Transmitter Preparation (Collar); Transmitter Charging; Checking The Accumulator Status In Transmitter (Collar) - Dog trace DOG GPS X20+ Manual

5.3 Power supply adapter and cable with a rechargeable clip

3
6

TRANSMITTER PREPARATION (COLLAR)

6.1 Transmitter charging

Transmitter GPS contains Li-Pol accumulator. The
accumulator must be recharged before first use.
1. Before charging clean the transmitter charging con-
tacts from any dirt. Connect the charging clip to the
transmitter (see the picture).
2. Connect supply cable to power adapter and plug it
into the mains.
3. The orange LED indicator on the transmitter will lit up.
4. Charging time is approximately 3 hours.
5. When the charging is completed, the orange LED
indicator goes OFF.
WARNING: Optimal temperature for charging is from 0 °C up to 40 °C. Use only
the original power adapter supplied in the packing with the device. Other chargers
could damage the accumulator.

6.2 Checking the accumulator status in transmitter (collar)

The status of the accumulator is indicated by LED indicators on the top side of the
transmitter (see chapter: 5.1 Product destription – transmitter) or symbol of battery on
the LCD of the receiver (handheld device).
status charge
100%
70%
40%
10%
receiver transmitter
green LED indicator
—
green and red LED indicator together
red LED indicator
1
1. Power supply adapter
2. USB cable
3. Charging clip
2
27