Dog trace DOG GPS X20+ Manual page 34

3. In the ON mode move the target zones of the transmitter and receiver near to each
other (just like during activation) and hold them together for 3 seconds – until an
increasing tone is heard.
4. Move the receiver far from the transmitter.
If you activated the function properly, the message BEEPER will appear on the display
of the receiver in the main navigation panel. In the top line of the display is shown the
message BEEPER, if the function is activated in the transmitter of at least one dog.
Setting the BEEPER function:
The BEEPER function must be set properly before the hunt.
1. On the receiver, select the number of the dog in the main navigation panel.
2. Hold the BEEPER button for long time– the display will show the first parameter for
the setting
3. Use the arrows
4. To select other parameters, use repeated long hold of the button BEEPER. The
adjusted parameters will appear in this order.
(mode) – setting the mode
(sensitivity) – setting the sensitivity
(time) – setting the time
(loudness) – volume
5. To return to the main screen push
Setting the mode – :
In the device we can select from 7 modes:
Mode No.
0
1
2
3
4
5
6
WARNING: The audible and vibration indication can be set up for a maximum of 4
dogs, the visual indication is adjustable for 9 dogs. When the sound and vibration
indicator is set, individual dogs can be identified by the number of beeps / vibrations
(max. 4 beeps or vibrations) indicating movement / stationary position of the dog.
If the acoustic and vibration indication is set for more dogs, vibration and sound are
running simultaneously
Modes 3 and 4 are intended for hunting wild boar. The indication (sound or vibration) is
triggered if the dog moves within the imaginary circle of the S-radius, which is given by
the sensitivity setting (see the sensitivity setting chapter) for the time t, which is given
by setting the time (time setting chapter).
34
– the mode.
/ to select the value.
indication
motion
Beeper text blinking
-
-
-
-
audio
vibration
.
stationary
-
audio
vibration
audio
vibration
-
-
Hunt type
-
Bird hunt
Bird hunt
Wild boar hunt
Wild boar hunt
-
-