Main Components - HP Metal Jet S100 User Manual

A system error message is displayed. Ensure that the emergency stop buttons are released before
restarting the system.
To stop the station completely, turn it off.
Main power switch
The main power switch is used to turn on the equipment, and can be used in emergency to turn it off.
Enable lockout/tagout before servicing.

Main components

The images displayed in the user documentation may differ from the final product.
Powder management station
The powder management station automatically blends, sieves, and loads metal powder into the build
unit according to the user-defined job and customized parameters.
The internal tank of the powder management station is filled with powder using vacuum transport.
22 Chapter 1 Introduction