Installing The Usb 3.0 Driver; Accessing The Internal Components Of The Computer - HP USB 3.0 4-Port SuperSpeed PCIe x1 Card User Manual

Installing the USB 3.0 Driver

1. For Microsoft Windows Vista and Windows 7 operating systems, you must disable the User
Account Control (UAC) before installing the driver.
To turn off the UAC in Windows Vista, go to Start > Control Panel > User Accounts > User
Accounts > Turn User Account Control on or off. Clear the check mark from the box next to
Use User Account Control (UAC) to help protect your computer.
To turn off the UAC in Windows 7, go to Start > Control Panel > User Accounts and Family
Safety > User Accounts > Change User Account Control Settings. Set the slider to Never
Notify.
2. Restart the computer to allow the system to recognize that the UAC has been disabled.
3. Insert the CD included with your USB 3.0 PCIe kit.
4. Navigate to and click USB 3.0
5. After installing the driver, return the User Account Control (UAC) to its default setting in the
Control Panel.
NOTE: HP recommends that you periodically check for driver updates. To download driver updates
go to http://www.hp.com/support.

Accessing the Internal Components of the Computer

To prepare the computer for installation of the HP USB 3.0 4-Port SuperSpeed PCIe x1 card, refer to
the documentation included with your computer for detailed instructions to:
1. Power off and unplug the computer from the power source.
2. Remove the computer cover or access panel.
4 Chapter 2 Installing the HP USB 3.0 4-Port SuperSpeed PCIe x1 Card
Drivers and follow the on-screen instructions.
ENWW