HP Metal Jet S100 User Manual page 35

CAUTION:
is as specified in the site preparation guide: connecting a different vacuum system could damage the
equipment.
High-temperature industrial oven
Allows you to recover used material that contains left-over residual solvent from a failed print.
WARNING!
WARNING!
outlined in the explosion protection document (EPD) or explosion hazard analysis that considers the
likelihood of an explosive atmosphere and potential ignition sources, as per local laws and regulations.
Consult the powder´s safety data sheet.
NOTE: If any accessories are added to the classified zone of the oven, they must be in accordance
with the classified zone.
Tablet pen
For use with the front panel if preferred to using your finger.
Set the administrator password
You can set the administrator password from the front panel.
Tap the settings icon
already been set, you will need to give the old password in order to set a new one.
Make sure that the external vacuum that you connect to the powder management station
Refer to Explosion hazard on page 4
The oven must be explosion-protected for combustible dust and flammable vapors, as
, then Security > Manage password, and enter the password. If a password has
safety precautions for additional requirements.
High-temperature industrial oven 31