HP Metal Jet S100 User Manual page 22

Warning labels (continued)
Label
18 Chapter 1 Introduction
Explanation
CAUTION: Personal protective equipment (PPE) required.
Wear a safety mask to operate and handle the machine,
supplies, or waste.
See the Safety Data Sheets (SDS) of the supplies.
CAUTION: Personal protective equipment (PPE) required.
Wear safety goggles to operate and handle the machine,
supplies, or waste.
See the Safety Data Sheets (SDS) of the supplies.
CAUTION: Safety boots required, in case of feet striking or
being struck by objects.
Wear anti-static footwear.
WARNING! An explosion-protected vacuum cleaner certified
for collection of combustible metal dust is required for
cleaning.
Do not sweep the dust or try to remove it with a compressed-
air gun.
Follow maintenance, cleaning tasks, and housekeeping to
ensure correct operation and safety. Inside and outside,
the equipment should be cleaned regularly to avoid dust
accumulation.
Refer to the material Safety Data Sheet (SDS) and meet local
regulations. Dispose of it according to local laws.
In addition, take measures to mitigate material spillage and
avoid potential ignition sources such as ESD (electrostatic
discharges), flames, and sparks. Do not smoke nearby.
CAUTION: If a massive spillage occurs, immediately clean
the bulk of the spilled powder by using conductive,
nonsparking scoops and soft brushes that have natural fiber
bristles. Residual amounts of material remaining after
preliminary cleanup, must be removed using an explosion-
protected vacuum cleaner.
CAUTION: Work platform recommended.
Operation and maintenance task may require the use of a
ladder or work platform to reach remote parts.
Be careful when you step down.