Table of Contents
Advertisement
Clean the Load station's Build Unit area
Always follow the steps of the procedure in the order presented.
Safety warnings
For more safety information, see
1.
Clean the area over the funnels with a damp cloth to remove the debris accumulation, especially
the BU wheels and bumpers. You can use a vacuum cleaner with the narrow nozzle to help
removing powder from the small areas, for example, in between wheels and pushers.
2.
Clean the Build Unit movement sub assembly with a damp cloth. Be extremely careful when
cleaning the Build Unit connector area and latching system as there are sensors and electronics
that can be damaged. Vacuum the connector plate, especially the aerial connectors.
IMPORTANT:
68
Chapter 4 Maintenance
Safety precautions on page 2
Do not use a wet cloth to clean the Build Unit connector.
Advertisement
Table of Contents
Troubleshooting
