Table of Contents
Advertisement
b.
Turn on the external vacuum cleaner.
c.
Confirm on the front panel that the external vacuum cleaner is connected. The process starts.
4.
Cover the vacuum nozzle with your hand for 5 seconds and then uncover it for another 5 seconds.
Repeat this sequence 3–5 times.
5.
At the front panel, tap Next.
6.
The front panel tells you when the vacuuming has finished. To start the quick-clean sieve process,
tap Start.
Quick-clean sieve
Always follow the steps of the procedure in the order presented.
Safety warnings
For more safety information, see
NOTICE:
Before some procedures, the Front Panel may ask you to clean the sieve. When it does, tap
Start and proceed.
NOTE:
If you do not clean the sieve when requested, the loading time may be affected.
1.
Bring an external vacuum cleaner close to the Load station. See the specifications and the position
of the external vacuum cleaner.
2.
Ensure that a build unit is inserted in the Load station.
48
Chapter 3 System operation
Safety precautions on page 2
Advertisement
Table of Contents
Troubleshooting
