6.
Clean the latching flat surfaces using the vacuum.
7.
Vacuum the connector plate, especially the aerial connectors.
Remove refiller cover
■
Unlock the cover and remove it.
NOTICE:
Do turn the cover over after removing and keep it as flat as possible to avoid powder
spillage. Clean the cover before placing it in its parking place.
WARNING!
Clean the Build Unit safety-lid parking area
Always follow the steps of the procedure in the order presented.
Safety warnings
For more safety information, see
Explosion hazard. Mechanical sparks and static electricity may be generated.
Safety precautions on page 2
Remove refiller cover
71