HP Metal Jet S100 User Manual page 56

● Weight reached warning: The weight in kilograms reached before the setpoint to notify you that the
process is nearly finished. You will hear an alarm.
●
Cleaning time: The time that the vacuum transport system is activated to enable the cleaning of
the pipes, including the manual feeding pipe and the automatic feeding pipe. Cleaning time can be
increased if the powder has low flowability, to ensure that all the remaining powder inside the pipe is
cleared out.
● Mixing time: The time that the mixer motor is on once the requested powder is transported to the
mixer. If after the manual feeding operation you do not wish to mix the powder, set the mixing time to
zero.
For extracting powder to a build unit
Follow one of two paths to view or edit the recipe.
Access through 'Extract powder'
1. From the left menu of the front panel, select the production icon
2. Under Extract powder properties, tap Extract recipe.
3. Edit the values of the recipe as desired. See the summary of the editable parameters below.
Which parameters you can edit depend on the permissions associated with your profile type.
4. Tap Apply.
Access through the settings menu
1. From the left menu of the front panel, select the settings icon
then the recipe that you want to view or edit.
2. Edit the values of the recipe as desired. See the summary of the editable parameters below.
Which parameters you can edit depend on the permissions associated with your profile type.
3. Tap Apply.
52 Chapter 3 System operation
, then tap Extract powder.
, then tap Utilities > Recipes, and