Record Set - Sanyo DSR-5709P Instruction Manual

3

RECORD SET

RECORD SET
1. RECORDING AREA SET
2. RECORDING CONDITIONS SET
3. NORMAL REC MODE SET
4. PROGRAM REC SET
5. TIMER SET
6. ALARM REC MODE SET
1. RECORDING AREA SET
The unit's hard disk is separated into two independent
recording areas. Furthermore, five different recording modes
can be used for these two areas.
The memory capacity for each area is allocated as a
percentage. (Setting units: 1%)
Recording Recording
area mode
Normal
Manual
recording
Timer
Automatic
recording
Recording
Alarm
Automatic
area
recording
Pre-alarm
Automatic
recording
Archive
Copy Manual
area
1
Click the button on the operation
panel.
The "MAIN MENU" is displayed.
2
Click "2. RECORD SET".
The "RECORD SET" screen is displayed.
English
Recording method
Recording is performed by
manual operation of the
button on the operation panel.
Recording is performed
automatically for the time
period set with "2-5. TIMER
SET".
Recording is performed
automatically when an alarm
is detected, as set with "2-6.
ALARM REC MODE SET".
Automatic recording of images
before an alarm occurs, as set
with "PRE-ALARM RECORDING"
in "2-6. ALARM REC MODE
SET".
This function is used together
with alarm recording.
The required images are
copied from another recording
area and stored by manual
operation of the button on
the operation panel.
3
Click "1. RECORDING AREA SET".
The "RECORDING AREA SET" screen is displayed.
RECORDING AREA SET
(1)
TOTAL CAPACITY
INTERNAL HDD
EXTERNAL HDD
(2)
RECORDING AREA
AREA FULL RESET
ARCHIVE AREA
AREA FULL RESET
(1) Total capacity display
Displays the total capacity of the hard disk and the capacity of
all internal and expansion hard disks.
You can install up to six hard disks by using an expansion
unit.
(2) Area-specific capacity display
Displays the capacity set by the unit for each recording area
as a percentage of the total capacity.
Setting and modification of recording area capacities
cannot be made from a PC.
(3) Recording area reset
If the overwrite setting is "OFF", recording automatically stops
when the corresponding recording area becomes full. In this
case, click [AREA FULL RESET] to overwrite from the
beginning of each area. ( step 4)
Reset is not required in the following cases and, therefore,
[AREA FULL RESET] is not displayed.
When the overwrite setting is "ON".
187
: 600 GB
: 300 GB
: 300 GB
: 80%
: 20%
(3)