1
DVR VIEWER2
Opening Image Files
The image files are not displayed when the Viewer Software is
run. Specify and open the playback file through the procedure
below.
1
Click
in the toolbar.
Or, click "Open" in the file menu.
The [Open] dialog is displayed.
2
Click
.
The [Browse for Folder] dialog is displayed.
3
Specify the folder in which the images
are saved and click [OK].
The folder specified in the [Open] dialog is displayed.
English
4
Verify the displayed folder and click
[OK].
The image file loads.
5
Screen display
The first image of the loaded file is initially displayed on full
screen.
Refer to the appropriate pages for details about the operations
of the Viewer Screen.
Switching the display pattern (1/4/9/16 screen) of the
playback images (Refer to P214)
Selecting the channels displayed on each screen (Refer to
P214)
Operating panel functions (Refer to P215)
213
01 09/29/2005 16:28:24