Record Set; Settings For Recording; Performing Easy Setup - Sanyo DSR-3506 Instruction Manual

3

RECORD SET

Main Menu

Settings for recording

The <RECORD SET> is used to make the following
settings.
Setting
1
2
3
4
English
FULL indicator
Description Ref.
<EASY SETUP>
Makes basic settings based P.53
on a number of days or a rate.
<RECORDING AREA SET>
Displays the total capacity of
the hard disk.
P.57
Sets the normal recording
area, the alarm recording
area, and the archive area.
<RECORDING CONDITIONS
SET>
Sets whether overwriting is to
be performed (by deleting old
video) or recording is to be P.60
stopped when any of the hard
disk's recording areas
become full. Also sets the
auto delete.
<NORMAL REC MODE
SET>
Sets the picture quality, audio P.62
recording, the recording rate,
and the program period.
ALARM FULL indicator
[MENU] button
5
6
7
8

Performing easy setup

Use the following procedures to make simple recording
settings. Two different setting methods may be used -- one
based on recording days; the other based on recording
rate.
Before making easy setup settings, connect the
camera(s) to the digital video recorder and then always
perform "CAMERA DETECT".
When easy setup settings and individual settings are
both set, the most recent settings override previous
settings.
Easy setup settings will be cancelled as a result of the
following operations.
53
[EXIT] button
Shuttle dial
Jog dial
<PROGRAM REC SET>
Sets program recording for P.63
cameras
<TIMER SET>
Makes timer settings so that
operations can be started at a P.65
specified time or on a
specified day.
<ALARM REC MODE SET>
Sets alarm recording, pre-
P.68
alarm recording, and motion
sensors.
<ALARM OPERATION SET>
Makes settings for operation
P.74
and display upon detecting an
alarm.
P.46)
(