Sanyo DSR-5709P Instruction Manual page 191

3 RECORD SET
Selecting setting values
Image resolution is determined by the product of picture
quality and recording rate.
The higher the picture quality and the faster the recording
rate, the better the image resolution; however, as higher
resolution requires more storage capacity, the recording time
decreases accordingly.
The recording rate for timer recording should be set
separately using the "TIMER SET" screen. ( P.191)
7
Set "REC PROGRAM GROUP" to the
desired program group.
[Settings] ( indicates default setting)
Setting
OFF No program group is set.
P-1 Program No. 1
P-2 Program No. 2
P-3 Program No. 3
P-4 Program No. 4
Settings for program groups should be made separately on
the "PROGRAM REC SET" screen. ( P.190)
8
Click [SAVE].
The setting is saved.
4. PROGRAM REC SET
When monitoring a number of cameras connected to this
digital video recorder, a separate recording rate can be set for
each camera. In addition, video recorded from each camera
and the corresponding recording rates can be set in programs
with up to four patterns, thus facilitating the simple
specification of programs for TIMER SET and NORMAL REC
MODE SET menus.
1
Click the button on the operation
panel.
The "MAIN MENU" is displayed.
2
Click "2. RECORD SET".
The "RECORD SET" screen is displayed.
Description
190
3
Click "4. PROGRAM REC SET".
The "PROGRAM REC SET" screen is displayed.
PROGRAM REC SET
4
PROGRAM :
P-1
5
SELECT INDIVIDUAL CAMERA RATE (FPS)
1 : 2 :
1 1
5 : 6 :
1 1
9 : 10 :
1 1
13 : 14 :
1 1
NORMAL REC : 317H
6
SAVE
4
Set "PROGRAM" to the desired
program group.
[Settings]
Setting
P-1 Program No. 1
P-2 Program No. 2
P-3 Program No. 3
P-4 Program No. 4
5
For "SELECT INDIVIDUAL CAMERA
RATE (FPS)", set the recording rate for
each camera.
Set the recording rate for the cameras from which video is to
be recorded.
[Settings] ( indicates default setting)
Setting
OFF
25, 12.5, 6.25, 3.125, 1.563,
1, 0.5, 0.333, 0.25, 0.2,
0.1, 0.05, 0.033
For program recording, set recording rate per channel.
Recording rates that can be set per channel are
automatically calculated.
When mirroring or pre-alarm recording is set to "ON",
recording rates that can be set are limited.
The recording rates listed in pull-down menus vary
according to the connected channels.
6
Click [SAVE].
When the setting is completed, the normal recording time
associated with the setting is displayed for reference
purposes.
Use the above procedure to set up to four program patterns.
Set values are lost if a different window is selected without
clicking [SAVE].
3 : 4 :
1 1
7 : 8 :
1 1
11 : 12 :
1 1
15 : 16 :
1 1
Description
Description
Recording rate is not set.
Recording is performed at the
selected recording rate (unit:
FPS).
English