Sanyo DSR-5709P Instruction Manual page 190

3 RECORD SET
3. NORMAL REC MODE SET
Use the following procedures to set conditions for normal
recording and timer recording.
Setting the picture quality for recording
Use the following procedure to set the picture quality for
normal recording.
1
Click the button on the operation
panel.
The "MAIN MENU" is displayed.
2
Click "2. RECORD SET".
The "RECORD SET" screen is displayed.
3
Click "3. NORMAL REC MODE SET".
The "NORMAL REC MODE SET" screen is displayed.
NORMAL REC MODE SET
4
PICTURE QUALITY
5
AUDIO RECORDING
6
REC RATE
7
REC PROGRAM GROUP :
8
4
Set "PICTURE QUALITY".
[Settings] ( indicates default setting)
Setting
BASIC Basic
NORMAL Normal
ENHANCED Enhanced
FINE Fine
SUPER FINE Super Fine
INDIV. Picture quality is set for each camera.
Setting the picture quality for each camera
(1) Set "PICTURE QUALITY" to "INDIV.".
The "NORMAL REC MODE SET" screen is displayed.
NORMAL REC MODE SET
(1)
PICTURE QUALITY
01 02
(2)
EN EN
09 10
EN EN
(3)
AUDIO RECORDING
REC RATE
REC PROGRAM GROUP :
(4)
SAVE
English
:
ENHANCED
:
OFF
: ( 166H )
A 12.5 FPS
OFF
SAVE
Description
:
INDIV.
03 04 05 06 07
EN EN EN EN EN
11 12 13 14 15
EN EN EN EN EN
:
OFF
: ( 166H )
A 12.5 FPS
OFF
(2) Set the picture quality for each camera.
On the DSR-5709P, cameras No. 01-09 are displayed.
(3) Set "AUDIO RECORDING", "REC RATE" and "REC
PROGRAM GROUP" ( steps 5 to 7).
(4) Click [SAVE].
Setting audio recording
Audio can be recorded together with images during normal
recording.
Note, however, that since this audio data is also stored in the
recording area, the recording time for this area decreases.
5
Set "AUDIO RECORDING" to "ON" or
"OFF".
[Settings] ( indicates default setting)
Setting
OFF
ON
Setting the recording rate
Use the following procedure to set the recording rate for
normal recording.
6
Set "REC RATE" to the desired
recording rate.
[Settings] ( indicates default setting)
Setting
A100, A50, A25, A16.67,
A12.5, A8.333, A6.25,
A5, A4.167, A3.571,
A3.125, A2.778, A2.5,
A2.273, A1.923, A1.667,
A1.471, A1.316, A1.19,
A1.087, A1
0.5, 0.333, 0.25, 0.2, 0.1,
0.05, 0.033
***
The letter "A" is displayed in front of recording rates that can
be set for audio recording.
When only one camera is connected, recording is
performed at 25 FPS even if 50 or 100 FPS are set.
When two or more cameras are connected and 50 or 100
FPS is set, the actual recording rate is roughly the
recording rate divided by the number of cameras.
08
(Example: When 8 cameras are connected and the
EN
recording rate setting is 100 FPS, the actual recording rate
16
is 12.5 FPS)
EN
When mirroring or pre-alarm recording is set to "ON",
recording rates that can be set are limited.
189
Description
Audio is not recorded.
Audio is recorded.
Description
Recording is performed at the
selected recording rate (unit: FPS).
(Audio can be recorded.)
Recording is performed at the
selected recording rate (unit: FPS).
(Audio cannot be recorded.)
Recording rate is not set.