Basic Operation; Searching For Recorded Video; Search Menu - Sanyo DSR-5709P Instruction Manual

3

SEARCHING FOR RECORDED VIDEO

Recorded video can be searched and played back using any
of six search modes.

Basic operation

1
In live mode (when playback is
stopped), click the
operation panel.
The "SEARCH" screen is displayed.
SEARCH
1. ALARM LOG SEARCH
2. ALARM SEARCH
3. ALARM THUMBNAIL SEARCH
4. TIME/DATE SEARCH
5. ARCHIVE AREA SEARCH
6. MOTION DETECTION SEARCH
2
Select and click the desired search
mode from the "SEARCH" screen.
The screen for the selected search mode is displayed.
3
Search for video using the search mode
screen.
See the following pages for more details regarding the
different search procedures.
4
Check the returned video using the
preview or thumbnail display and then
click the screen.
Play mode is activated and playback of the full video starts.
Still image, fast-forward and other similar operations can be
performed during playback. ( P.170)
English
button on the
175

Search menu

Type of
Search mode recording
searched
ALARM LOG Alarm
1
SEARCH recording
ALARM Alarm
2
SEARCH recording
ALARM
Alarm
3 THUMBNAIL
recording
SEARCH
Normal
TIME/DATE recording and
4
SEARCH alarm
recording
ARCHIVE
5 AREA Archive area
SEARCH
Normal
MOTION
recording and
6 DETECTION
alarm
SEARCH
recording
It may take more than one minute to search video
depending on the size of the hard disk and/or stored data.
Description
Search for alarm video by
specifying the date/time.
When the search is
completed, images can be
selected from ALARM
SEARCH or ALARM
THUMBNAIL SEARCH
and displayed in a list or as
thumbnails.
Search and play back
alarm images from the
alarm event list.
Search and play back
alarm images using
thumbnails (small images).
Search and play back
recorded images by date
and time.
Search and play back
images stored (or copied)
to the archive area using
an image list.
Search and play back
recorded images of moving
objects detected in
accordance with motion
sensor settings.