Dmx-Protocol 16 Bit-Resolution (8 Bit-Resolution) - Future light DJ-HEAD 575 WASH Pro-Head-Wash User Manual

Table of Contents

Advertisement

Available languages

Available languages

Note:
The modes of DMX 512 data and lamp are shown via the display:
After switching on, the device will automatically detect whether DMX 512 data is received or not. If the data
is received, the the display will show "A001" with the actually set address. If there is no data received at the
DMX-input, the display will flash.
This situation can occur if:
- the 3 PIN XLR plug (cable with DMX signal from controller) is not connected with the input of the device.
- the controller is switched off or defective, if the cable or connector is defective or the signal wires are swap
in the input connector.
Note:
It's necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order to
ensure proper transmission on the DMX data link.

DMX-protocol 16 Bit-resolution (8 Bit-resolution)

Control-channel 1 (1) - Horizontal movement (Pan) (within 530°)
Push slider up in order to move the head horizontally (PAN).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be stopped at any position you wish.
Control-channel 2 (2) - Vertical movement (Tilt) (within 280°)
Push slider up in order to move the head vertically (TILT).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be stopped at any position you wish.
Control-channel 3 - Pan-movement with 16 Bit-resolution
Control-channel 4 - Tilt-movement with 16 Bit-resolution
Control-channel 5 (3) - Pan/Tilt-speed
Decimal Hexad. Percentage S/F
0 0
00 00
0% 0%
1 249
01 F9
0% 98%
250 252
FA FC
98% 99%
253 255 FD FF
99% 100%
Control-channel 6 (4) - Switch on/off the lamp, reset, speed control of cooling fan
Decimal Hexad. Percentage S/F
0 127
00 7F
0% 50%
128 139
80 8B
50% 55%
140 229
8C E5
55% 90%
230 239
E6 EF
90% 94%
240 255
F0 FF
94% 100%
S Maximum speed (tracking mode)
F Decreasing speed (vector mode)
S Maximum speed (tracking mode), black-out while color changes
S Maximum speed (vector mode), black-out while Pan, Tilt moving or
color changes
F Decreasing speed of fan
S Switch on the lamp, reset, open position
S No function
S Switch off the lamp after 3 seconds
S No function
37/92
Feature
Feature
00025955.DOC, Version 1.2

Advertisement

Table of Contents
loading

This manual is also suitable for:

51839565

Table of Contents