Dmx-Mode; Dmx Protocol - Future light POS-12 POWERSTICK Color Changer User Manual

DMX-Mode

The device has five different DMX channel modes. The Control Board allows you, as described below, to
assign the DMX channel mode.
Addressing
Press the MODE button until the display shows Address. You can now set the desired address via the UP
or DOWN buttons. Press ENTER to confirm. The Control Board allows you to assign the DMX fixture
address, which is defined as the first channel from which the FUTURELIGHT POS-12 LED QCL Powerstick
will respond to the controller.
If you set, for example in the 52 channel mode, the address to channel 53, the device will use the channel 53
to 104 for control.
Please, be sure that you don't have any overlapping channels in order to control each FUTURELIGHT POS-
12 LED QCL Powerstick correctly and independently from any other fixture on the DMX-chain.
If several POS-12 LED QCL Powerstick are addressed similarly, they will work synchronically.
Controlling:
After having addressed the POS-12 LED QCL Powerstick, you may now start operating it via your lighting
controller.

DMX protocol

Mode/Channel
4 Ch 6 Ch 10 Ch 48 Ch
5 1
1 1 2
2 2 3
3 3 4
4 4 5
6
6
7
Decimal Hexad.
52 Ch
51
0 255 00 FF
0 255 00 FF
0 255 00 FF
0 255 00 FF
0 255 00 FF
52
0 10 00 0A
11 255 0B FF
0 0 00 00
1 5 01 05
6 10 06 0A
11 255 0B FF
0 10 00 0A
11 30 0B 1E
31 50 1F 32 12% 20%
51 70 33 46 20% 27%
71 90 47 5A 28% 35%
91 110 5B 6E 36% 43%
111 130 6F 82 44% 51%
28/34
S/F
Percentage
Dimmer intensity
Gradual adjustment of the dimmer
0% 100% F intensity from 0 to 100 %
Red
0% 100% F Red 0 - 100 % increasing
Green
0% 100% F Green 0 - 100 % increasing
Blue
0% 100% F Blue 0 - 100 % increasing
White
0% 100% F White 0 - 100 % increasing
Strobe
0% 4% S No function
4% 100% F Strobe-effect with increasing speed
Strobe
0% 0% S Neutral
0% 2% S Music control
Neutral
2% 4% S
4% 100% F Strobe-effect with increasing speed
Color presets
0% 4%
S No function
4% 12% F
Red 100% / green increasing / blue 0%
F
Red decreasing / green 100% / blue0%
F
Red 0% / green 100% / blue increasing
F
Red 0% / green decreasing / blue 00%
F
Red increasing / green 0% / blue 100%
F
Red 100% / green 0% / blue decreasing
00078164.DOC, Version 1.0
Feature