7. Secure the knobs to the ends of the installation screws using the included screwdriver.
8. Connect the ADF cable to the scanner's ADF connector.
9. Close the ADF.
10. Connect the power cord to the scanner and then turn on the scanner.
To load documents into the ADF, see "Loading Documents in the Automatic Document
Feeder" on page 103.
Loading Documents in the Automatic Document Feeder
Document Specifications
The table below lists the sizes of paper you can load in the ADF.
Paper name
Measurements
Loading direction in ADF
Using the Optional Automatic Document Feeder
GT-20000
User's Guide
103