Selecting the Scan Size
You can scan your images at their original size, or you can reduce or enlarge their size as
you scan them. You do this using the Target Size setting.
If you are going to scan your image to a specific size, you should select the Target Size
setting after previewing it, but before adjusting your scan area indicated by creating a
marquee. This sets the scan area to correct proportions so your image will not be cropped
unexpectedly.
To select the scan size, see one of these sections.
Home Mode: "Selecting the Scan Size in Home Mode" on page 45
Professional Mode: "Selecting the Scan Size in Professional Mode" on page 47
Selecting the Scan Size in Home Mode
GT-20000
User's Guide
Scanning Your Originals
45