Replacing The Scanner Lamp; Transporting The Scanner - Epson GT-20000N Pro User Manual

Replacing the Scanner Lamp

The luminosity of the scanner lamp declines over time. If the lamp breaks or becomes too
dim to operate normally, the scanner stops working and both the Ready and Error lights
rapidly flash. When this happens, the lamp assembly must be replaced by a professional.
For details, contact your dealer. See "Contacting Customer Support" on page 133.
Caution:
c
Never open the scanner case. If you think repairs or adjustments are necessary, consult your
dealer.

Transporting the Scanner

Before you transport the scanner for a long distance or store it for an extended period of
time, the scanner's carriage needs to be in the home position to prevent damage.
1. Make sure the carriage is in the home position of the scanner (on the left side). If the
carriage is not in the home position, turn on the scanner and wait until the carriage
moves to the home position.
2. Turn off the scanner, then unplug the power cord.
3. Pull down the transportation lock to the locked position.
4. Disconnect all the cables from the scanner.
5. Attach the packing materials that came with the scanner, then repack the scanner in its
original box or a similar box that fits the scanner snugly.
GT-20000 User's Guide
113
Maintenance