4. Make sure the Internet Protocol (TCP/IP) box is checked in the Local Area Connection
Properties window and click OK. Then go to "Scanning Over a Network" on page 95.
If Internet Protocol (TCP/IP) does not appear in the list, go to step 5.
5. Click Install. The Select Network Component Type window appears.
6. Select Protocol from the list and click Add.
7. Select Internet Protocol (TCP/IP) and click OK.
8. Make sure the Internet Protocol (TCP/IP) box is checked and click OK or Close. Then
go to "Scanning Over a Network" on page 95.
Using the Optional Network Image Express Card
GT-20000
User's Guide
94