Step 12 - HARVEST H13112 Assembly Manual

FIG 11- 2

Step 12

1)
FIG 12- 1
2) Slide it over the bottom shaft with the grease fitting on the left side, use (4)
3) Take the lock collar and slip it over the shaft and push it against the bearing turn the lock collar counter
clockwise, using a punch and hammer to tap it to lock it, tighten the set screw on the lock collar with a Allen
wrench
Lock collar
and bearing
Grease fitting
block
FIG 12- 2
Lock collar
Page 18 of 68