Step 8; Step 9 - HARVEST H13112 Assembly Manual

Step 8

1) Now with all bolts tighten down take the (2)
the discharge assembly (fig 8-1) and block it open with a block of wood, now hook the springs on the eye hook
on the inside of the discharge assemble on both the left and right sides.
Discharge overflow hood
Discharge overflow hood spring hooks

Step 9

1) take a set of pliers and grab a hold of the spring with them and stretch it to the lid and hook it onto the eye
hooks on the inside of the lid.
2) Make sure that both springs are hooked up.
Discharge
overflow hood
Discharges overflow
spring, X2
Inside spring hooks
rings with hooks on both sides open the overflow lid on
FIG 8- 1
FIG 9- 1
Factory used, paint
hook only.
1/2" Flange Nut
Factory used, paint
hook only.
Page 16 of 68