Installation Of Manual Holder; Step 25 - HARVEST H13112 Assembly Manual

FIG 24- 35
52) attach 90-degree elbow
FIG 24- 36
53) with diffuser to cylinder Put breathers in bottom cylinders.
54) Locate the 8f jic x 6m reducer fitting, Attach the reducer fitting to the velocity fuse, Attach the hydraulic
hose to the reducer fitting, Tighten the fittings
55) Locate the brass breather, Install the brass breather on the lower end of the hydraulic cylinder, Tighten
brass breathers

Installation of manual holder

Step 25

1) Locate the manual holder,
FIG 25- 1
2) take the lid off of the manual holder and place the manual holder on the lower
PART #30097
VELOCITY FUSE
PART #11018
#8 FEMALE JIC
TO #8MALE JIC
ELBOW
Page 44 of 68