Getting Started
°C
®
12
User Manual Secura
, Quintix
4.3
Choosing a Location
t
Select the right setup location:
–
Set up the device on a stable, even surface that is not exposed to vibrations
(e.g., weighing stone).
–
Maintain free access to the device at all times.
Choose a location that is not subject to the following negative influences:
–
Heat (heater or direct sunlight)
–
Drafts from open windows, AC systems, and doors
–
Vibrations during weighing
–
Heavy traffic areas (personnel)
–
Excessive moisture
–
Electromagnetic fields
Acclimatization
Condensation from humidity can form on the surfaces of a cold device when it is
brought into a warmer area. To avoid the effects of condensation, condition the
balance for about two hours, leaving it unplugged from the power supply, before
plugging the balance back into the mains.
®
®
, Practum