Lenovo 7Y45 Instructions Manual page 88

• FQXSPPP4008I: The soft minimum power cap value changed from [arg1] watts to [arg2] watts.
Soft Minimum Power Cap value changed
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0116
User Action:
Information only; no action is required
• FQXSPPP4009I: The measured power value exceeded the power cap value.
Power exceeded cap
Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: IMM CIM ID: 0117
User Action:
It is the information to show that the power capping value on XCC web GUI is lower than what the system
is used. Please modify power capping value on XCC web GUI to remove this warning.
• FQXSPPP4011I: Power capping was activated by user [arg1].
Power capping activated by user
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0119
User Action:
Information only; no action is required
• FQXSPPP4012I: Power capping was deactivated by user [arg1].
Power capping deactivated by user
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0120
User Action:
Information only; no action is required
• FQXSPPP4013I: Static Power Savings mode has been turned on by user [arg1].
84
ThinkSystem ST250 Messages and Codes Reference