Lenovo 7Y45 Instructions Manual page 116

Messages and codes reference
Hide thumbs Also See for 7Y45:
Table of Contents

Advertisement

Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: PLAT CIM ID: 0179
User Action:
Information only; no action is required.
• FQXSPSE0000F: The Chassis [PhysicalPackageElementName] was opened.
This message is for the use case when the Chassis has been opened.
Severity: Warning
Serviceable: Yes
Automatically notify Support: No
Alert Category: Warning - Other
SNMP Trap ID: 60
CIM Prefix: PLAT CIM ID: 0004
User Action:
The chassis is either opened or is not properly sealed, please ensure the chassis is installed well.
• FQXSPSE2000I: The Chassis [PhysicalPackageElementName] was closed.
This message is for the use case when a Chassis has been closed.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Other
SNMP Trap ID: 60
CIM Prefix: PLAT CIM ID: 0005
User Action:
Information only; no action is required.
• FQXSPSE4000I: Certificate Authority [arg1] has detected a [arg2] Certificate Error.
This message is for the use case when there is an error with an SSL Server, SSL Client, or SSL Trusted CA
Certificate.
Severity: Error
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0002
User Action:
Make sure that the certificate that you are importing is correct and properly generated.
• FQXSPSE4001I: Remote Login Successful. Login ID: [arg1] using [arg2] from [arg3] at IP address
[arg4].
This message is for the use case where a user successfully logs in to a Management Controller.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Remote Login
112
ThinkSystem ST250 Messages and Codes Reference

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinksystem st2507y46

Table of Contents