Lenovo 7Y45 Instructions Manual page 33

Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0137
User Action:
Complete the following steps until the problem is solved:
1. Turn off the server and disconnect it from the power source. You must disconnect the server from AC
power cycle to reset the XCC.
2. After 45 seconds, reconnect the server to the power source and turn on the server.
3. Retry the operation.
• FQXSPBR4008I: Management Controller [arg1]: Configuration restoration from a file by user [arg2]
failed to start from [arg3] at IP address [arg4].
This message is for the use case where a user restores a Management Controller configuration from a file
and the restoration fails to start.
Severity: Error
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0138
User Action:
Complete the following steps until the problem is solved:
1. Turn off the server and disconnect it from the power source. You must disconnect the server from AC
power cycle to reset the XCC.
2. After 45 seconds, reconnect the server to the power source and turn on the server.
3. Retry the operation.
• FQXSPBR4009I: Management Controller [arg1]: cloning configuration from neighbor server [arg2]
by group name [arg3].
This message is for the use case where a user synchronizes a Management Controller configuration by
Federation.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0255
User Action:
Information only; no action is required
• FQXSPBR400AI: Management Controller [arg1]: cloning configuration from neighbor server [arg2]
by group name [arg3] completed.
This message is for the use case where a user synchronizes a Management Controller configuration by
Federation and it completes.
Severity: Info
Serviceable: No
.
Chapter 2 XClarity Controller events
29