Table of Contents
Advertisement
Information only; no action is required
• FQXSPSE4030I: Security: Userid: [arg1] had [arg2] login failures from IPMI serial client.
This message is for the use case where a user has failed to log in to a Management Controller from IPMI
serial client
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Remote Login
SNMP Trap ID: 30
CIM Prefix: IMM CIM ID: 0155
User Action:
Information only; no action is required
• FQXSPSE4031I: Remote Login Successful. Login ID: [arg1] from [arg2] serial interface.
This message is for the use case where a user successfully logs in to a Management Controller.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Remote Login
SNMP Trap ID: 30
CIM Prefix: IMM CIM ID: 0156
User Action:
Information only; no action is required
• FQXSPSE4032I: Login ID: [arg1] from [arg2] at IP address [arg3] has logged off.
This message is for the use case where a user has logged off of a Management Controller.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Remote Login
SNMP Trap ID: 30
CIM Prefix: IMM CIM ID: 0157
User Action:
Information only; no action is required
• FQXSPSE4033I: Login ID: [arg1] from [arg2] at IP address [arg3] has been logged off.
This message is for the use case where a user has been logged off of a Management Controller.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Remote Login
SNMP Trap ID: 30
CIM Prefix: IMM CIM ID: 0158
User Action:
Information only; no action is required
120
ThinkSystem ST250 Messages and Codes Reference
Advertisement
Table of Contents
