Table of Contents
Advertisement
User Action:
Information only; no action is required
• FQXSPSE4067I: User [arg1] accessible interfaces is set to [arg2][arg3][arg4][arg5][arg6] by user
[arg7] from [arg8] at IP address [arg9].
User account accessible interfaces assigned by user
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0285
User Action:
Information only; no action is required
• FQXSPSE4068I: Security: Userid: [arg1] using [arg2] had [arg3] login failures from Redfish client at
IP address [arg4].
This message is for the use case where a user has failed to log in to a Management Controller from
Redfish.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Remote Login
SNMP Trap ID: 30
CIM Prefix: IMM CIM ID: 0289
User Action:
Information only; no action is required
• FQXSPSE4069I: LDAP set by user [arg1]: RootDN=[arg2], UIDSearchAttribute=[arg3],
BindingMethod=[arg4], TargetName=[arg5], GroupFilter=[arg6], GroupAttribute=[arg7],
LoginAttribute=[arg8].
A user configured an LDAP Miscellaneous setting
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0290
User Action:
Information only; no action is required
• FQXSPSE4070I: Lockdown mode is [arg1] by user [arg2] from [arg3] at IP address [arg4].
A user enables or disables Lockdown mode
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
.
Chapter 2
XClarity Controller events
129
Advertisement
Table of Contents
