Lenovo 7Y45 Instructions Manual page 20

Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPPP4016I Dynamic Power Savings mode has been turned off by user [arg1].
Power cap and external throttling occurred.
FQXSPPP4017I
FQXSPPP4019I Power cap throttling occurred.
FQXSPPP4020I The measured power value has returned below the power cap value.
FQXSPPP4022I The server was restarted for an unknown reason.
FQXSPPP4023I The server is restarted by chassis control command.
The server was reset via push button.
FQXSPPP4024I
FQXSPPP4025I The server was powered-up via power push button.
FQXSPPP4026I The server was restarted when the watchdog expired..
FQXSPPP4027I The server was restarted for OEM reason.
FQXSPPP4028I The server was automatically powered on because the power restore
policy is set to always on.
FQXSPPP4029I The server was automatically powered on because the power restore
policy is set to restore previous power state..
FQXSPPP4030I The server was reset via Platform Event Filter.
FQXSPPP4031I The server was power-cycled via Platform Event Filter.
FQXSPPP4032I The server was soft reset.
FQXSPPP4033I The server was powered up via Real Time Clock (scheduled power
on).
FQXSPPP4034I The server was powered off for an unknown reason.
FQXSPPP4035I The server was powered off by chassis control command.
FQXSPPP4036I The server was powered off via push button.
FQXSPPP4037I The server was powered off when the watchdog expired.
FQXSPPP4038I The server stayed powered off because the power restore policy is set
to always off.
FQXSPPP4039I The server stayed powered off because the power restore policy is set
to restore previous power state..
FQXSPPP4040I The server was powered off via Platform Event Filter.
FQXSPPP4041I The server was powered off via Real Time Clock (scheduled power
off).
FQXSPPP4042I Management Controller [arg1] reset was initiated due to Power-On-
Reset.
FQXSPPP4043I Management Controller [arg1] reset was initiated by PRESET.
FQXSPPP4044I Management Controller [arg1] reset was initiated by CMM.
FQXSPPP4045I Management Controller [arg1] reset was initiated by XCC firmware.
FQXSPPP4046I Remote power permission is [arg1].
FQXSPPP4047I Management Controller [arg1] reset was initiated by user [arg2].
16
ThinkSystem ST250 Messages and Codes Reference
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational