Lenovo 7D7M Reference page 49

UEFI deployment boot mode is enabled for NextBoot
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0197
User Action:
Information only; no action is required.
• FQXSPFC4004I: UEFI deployment boot mode is enabled for NextAc.
UEFI deployment boot mode is enabled for NextAC
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0198
User Action:
Information only; no action is required.
• FQXSPFC4005I: UEFI deployment boot mode has been disabled.
UEFI deployment boot mode has been disabled
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0199
User Action:
Information only; no action is required.
• FQXSPFW0000N: The System [ComputerSystemElementName] encountered a POST Error.
This message is for the use case when an implementation has detected a Post Error.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0184
User Action:
Complete the following steps:
1. Original UEFI settings are still present. If customer desires to continue using the original settings,
select Save Settings.
2. If User did not intentionally trigger the reboots, check logs for probable cause. For example, if there is
a battery fault event, follow the steps to resolve that event.
.
Chapter 2 XClarity Controller events
45