Lenovo 7D7M Reference page 172

• FQXSFPU4052G: TPM_POLICY is not locked
Severity: Warning
User Action:
Complete the following steps:
1. Reboot the system.
2. If the problem persists, collect Service Data logs.
3. Contact Lenovo Support.
• FQXSFPU4053G: System TPM_POLICY does not match the planar.
Severity: Warning
User Action:
Complete the following steps:
1. Remove any newly added TPM card from the planar or re-install the original TPM card that shipped
with the system.
2. Reboot the system.
3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
• FQXSFPU4054G: TPM card logical binding has failed.
Severity: Warning
User Action:
Complete the following steps:
1. Reboot the system.
2. If the problem persists, collect Service Data logs.
3. Contact Lenovo Support.
• FQXSFPU4056M: TPM card is changed, need install back the original TPM card which shipped with
the system.
Severity: Error
User Action:
Complete the following steps:
1. Re-install the original TPM card that shipped with the system.
2. Reboot the system.
3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
• FQXSFPU4057I: Secure boot variable is being accessed with an unauthorized password, reset the
system immediately to recover.
Severity: Warning
User Action:
Information only; no action is required.
• FQXSFPU4058I: Secure Boot Setting is changed from enabled to disabled
Severity: Warning
168
ThinkSystem SD650 V3 / ThinkSystem SD650-I V3 Neptune DWC Trays and DW612S Neptune DWC Enclosure Messages and
Codes Reference