Lenovo 7D7M Reference page 158

5. If an error occurs, follow steps 1 and 4 to get details on new error message.
6. If the problem persists, collect Service Data logs.
7. Contact Lenovo Support.
• FQXSFMA0037G: Intel Optane PMEM interleave set (DIMM [arg1]) is migrated from another system
(Platform ID: [arg2]), these migrated PMEMs are not supported nor warranted in this system.
Severity: Warning
User Action:
Complete the following steps:
1. Check the system specification.
2. Move the PMEM back to the original machine or same machine type platform, or backup the
persistent region data and delete namespace, disable security, security erase, follow PMEM guide to
create new goal if the target installed system support PMEM.
3. If the problem persists, collect Service Data logs.
4. Contact Lenovo Support.
• FQXSFMA0038K: All Intel Optane PMEMs could not be auto unlocked because of no passphrase.
Severity: Warning
User Action:
Complete the following steps:
1. Provision the passphrase for Intel Optane PMEM auto unlock or unlock PMEMs in OS with Intel
PMEM tools.
2. Methods to provision the passphrase:
a. Option 1. enable security on all Intel Optane PMEMs found through System Setup with Scope of
"Platform" under the (System Settings > Intel Optane PMEMs > Security).
b. Option 2. enable security on all Intel Optane PMEMs found through OneCLI command (OneCLI.
exe config set IntelOptanePMEM.SecurityOperation "Enable Security") and (OneCLI.exe config
set IntelOptanePMEM.SecurityPassphrase "the user passphrase").
Note: if the security state is mixed, then disable security for those PMEMs in System Setup by
selecting the scope of "Single PMEM" under the (System Settings > Intel Optane PMEMs >
Security) firstly before take the action to provision the passphrase. If PMEMs are not unlocked,
system will not see or access the persistent region of PMEMs.
• FQXSFMA0039K: One or more Intel Optane PMEMs could not be auto unlocked because of invalid
passphrase.
Severity: Warning
User Action:
Complete the following steps:
1. Use OneCLI to check which PMEM is failed for unlock. Using different passphrases could caused
auto unlock failure.
2. Use UEFI setup page or Intel PMEM OS tool to unlock the related PMEM with right passphrase.
3. in order to avoid this auto unlock failure in next boot, change the passphrase of these PMEMs in
System Setup utility with the scope of "Single PMEM" under the (System Settings > Intel Optane
PMEMs > Security).
Note: If PMEMs are not unlocked, system will not see or access the persistent region of PMEMs.
154
ThinkSystem SD650 V3 / ThinkSystem SD650-I V3 Neptune DWC Trays and DW612S Neptune DWC Enclosure Messages and
Codes Reference