Preset Mode; Routing Mode - Analog way QuickVu User Manual

7.2.2 Audio
7.2.2 Audio
In this section, you will setup the audio of your device, you have several modes. In all modes, you have the
possibility to output the audio in AES3 or SPDIF:
28
NO AUDIO: the audio of your device is switched off

PRESET MODE:

the standard mode of use of the device
You have two possibilities:
• Top layer: the sound on the output will follow the audio input of the top
layer.
• Breakaway: when breakaway is activated, the audio on the output is
memorized into the preset. A change of preset, changes the audio on the
output. A change of content into a video layer has no effect on the audio.

ROUTING MODE:

in this configuration, simply choose an audio input to
assign it to the output. The audio configuration remains the same during
the show.
In this example input1 is on out1 and input 2 is on out 2.