Analog way QuickVu User Manual page 61

INPUTS
CONFIG STATUS
[...]
AUTOSET ALL
SYNC. STATUS
INPUT 1: NO
INPUT 2: NO
INPUT 3: NO
INPUT 4: NO
HDMI 1: NO
HDMI 2: NO
SDI 1: NO
SDI 2: NO
INPUT 1
INPUT 2
INPUT 3
INPUT 4
HDMI 1
HDMI 2
SDI 1
SDI 2
INPUT STATUS
INPUT 1
ACTIVE PLUG:
(I1)
FRMT:
RATE:
(I2)
SYNC.POL.:
(I2)(I3)
HDCP
(I2)(I4)
AUTOSET
FREEZE
ACTIVE PLUG
ANALOG
DVI-D
SDI
HDMI
(I1) Displayed when input is a multiplug input.
(I2) Displayed when a valid input signal is detected
(I3) Displayed when it is an analog plug and when
the signal is computer HV type
(I4) Displayed for HDMI and DVI-D plugs
(I5) Displayed when the plug is analog, DVI-D or
HDMI
(I6) Displayed when the plug is analog
(I7) Displayed when the plug is analog and the
signal type is VIDEO RGBS
(I8) Displayed when the plug is not SDI
8.3 Menu tree
61