Lcd Brightness - Analog way QuickVu User Manual

7.2.10 Service management
7.2.10 Service management
TECHNICAL SUPPORT: Display the different technical support contacts depending on your area.
7.2.11 Control management
In this menu, all specific settings, which cannot be sorted under the other menus, are listed:
Network
Functions
Erase memories
Into this section, you can erase individual settings.
• Erase input settings memory: all input settings will return to their default value. This includes image, aspect,
user format and keying parameters.
• Erase thumbnail: all the thumbnails you store on your computer will be erased.
Factory reset
Click on start to erase all settings (except network and RCS² parameters). The unit will reboot itself after the
factory reset.
38
Into the service section, you will find tools to warn you if the unit has a
problem.
Under TEMPERATURE, there is the alarm tab. If any fan FPGA or board
are faulty, it will be displayed.
The interface loaded into the unit uses the IP configuration.
Under INTERFACE, you can define a new:
- IP address
- Netmask
- Gateway
- Port: choose the port
- Protocol: choose TCP (by default) or UDP
Under function, you can edit:
- TIME:
- AUTO LOCK:
be locked out from selecting empty inputs that have
no source connected,

- LCD BRIGHTNESS:

- KEY BRIGHTNESS:
keyboard.
the internal real time clock,
when this feature is enabled, you will
adjust the brightness of your LCD,
adjust the brightness of your