C Transport And Commissioning; Lifting By Crane - Jungheinrich EJE 114 Operating Instructions Manual

C Transport and Commissioning

1

Lifting by crane

WARNING!
All persons involved in loading by crane must be trained
Incorrect crane loading procedures due to untrained personnel can cause the truck
to fall. There is a risk of injury to personnel and a risk of material damage to the
truck.
uLoading must only be performed by specialist personnel trained for this purpose.
The specialist personnel must be instructed in securing loads on road vehicles and
handling load securing devices. In each case correct measurements must be
taken and appropriate safety measures applied.
WARNING!
Improper loading by crane can result in accidents
Improper use or use of unsuitable lifting gear can cause the truck to crash when
being loaded by crane.
Prevent the truck from hitting other objects during lifting, and avoid uncontrolled
movements. If necessary, secure the truck with guide ropes.
uThe truck may be loaded only by people who are trained in using lifting
accessories and lifting gear.
uWear personal protective equipment (e.g. safety shoes, safety helmet, hi-vis
jacket, protective gloves) when loading by crane.
uDo not stand under suspended loads.
uDo not walk into or stand in a hazardous area.
uAlways use lifting gear with sufficient capacity (for truck weight, see truck data
plate).
uAlways attach the crane lifting gear to the prescribed attachment points and
prevent them from slipping.
uUse the lifting accessories only in the prescribed load direction.
uCrane lifting gear must be fastened in such a way that it does not come into
contact with any attachments when lifting.
CAUTION!
Danger of injury from swinging truck
Different battery versions and battery weights can lead to the truck oscillating in a
suspended position after being raised.
uRaise the truck carefully and allow to swing.
uKeep the hazardous area around the truck clear.
35