C Transportation And Commissioning; Transportation By Crane; Commissioning - Jungheinrich AMXE 10 Operating Instructions Manual

C Transportation and commissioning

1

Transportation by crane

m
Use only hoisting equipment with appropriate carrying capacity, refer to the truck ID
plate for truck weight.
A
Attachment points (1) have been provided for transporting the truck with a crane hoist
gear.
– Park and lock the truck (refer to
chapter E).
– Attach the crane hoist gear to the
attachment points (1).
m
Attach the crane hoist gear at the
attachment points in such a way that it
cannot slip for any reason!
The crane hoist gear must be attached
in such a way that it cannot touch any
truck components.
2

Commissioning

To make the truck operational after delivery or transport, perform the following steps:
– Check the equipment for completeness and condition.
– If necessary, install the battery. Make sure that the battery cable is not damaged.
– Charge the battery (see chapter D).
– Commission the truck as detailed in chapter E.
A
When the truck is parked, the running surface of the tyres will flatten. These
flattenings will disappear after travelling for a while.
C 1