Lcr To Authority Group Assignment; Figure 35 Configuration > Pbx > Group Management; Figure 36 Lcr To Authority Group Assignment - ZyXEL Communications IP PBX X6004 User Manual

Chapter 3 Tutorials

3.2.3 LCR to Authority Group Assignment

The Group Management screen allows you to give an authority group (and the extensions in
that group) the right to use an LCR (outbound dial condition). In our example, we give the
authority group Basic the right to call out using the LCR local_call.
Procedure:
1 Click Configuration > PBX > Group Management to view the following screen.
Figure 35 Configuration > PBX > Group Management
2 Click the Advanced icon in the Authority Group section (in this example there is only
one authority group - Basic) of the screen to view the screen as shown. Select the
checkbox in the Advanced column of the local_call LCR as shown below. Click Apply.

Figure 36 LCR to Authority Group Assignment

3 You can now use the telephones that are part of the Basic authority group to make
outbound calls using the PSTN connection. The following figure summarizes the
outbound call process for this example.
54
X6004 User's Guide