Table of Contents
Advertisement
Table 40 Add Multiple SIP Extensions
LABEL
Apply
Cancel
14.3.2 Add a SIP Extension
Use this screen to add a SIP extension to an authority group on the X6004. To access this
screen, click the Add icon in the Authority Group configuration screen.
Figure 108 Add a SIP Extension
Each field is described in the following table.
Table 41 Add a SIP Extension
LABEL
Basic Setting
Group
Extension
Number
Web/IVR/VM PIN
Code
SIP Auth. User
Name
SIP Auth.
Password
Description
X6004 User's Guide
DESCRIPTION
Click Apply to save your changes.
Click Cancel to go back to Authority Group configuration page without saving
your changes.
DESCRIPTION
Select the authority group you want this extension to belong to.
Type the extension number for this IP phone extension. The extension number
can be from 1 to 20 digits in length.
Type the PIN code that this allows the person with this extension to access the
web portal, Interactive Voice Response system or Voice Mail. This value can be
up to eight alphanumeric characters and spaces are not allowed.
Type the SIP user name associated with this extension. The IP phone registering
with the X6004 must provide this for authentication. The user name can be up to
32 alphanumeric characters long. Spaces are not allowed.
Select Customization and type the SIP password associated with this extension.
The IP phone registering with the X6004 must provide this for authentication. The
password can be up to 32 alphanumeric characters long. Spaces are not allowed.
If you are using auto provisioning (see
Random and type the length of the password (4 - 32). The X6004 will assign a
random SIP password to this extension. The password will be automatically sent
to the IP phone client.
Type a brief description for this SIP extension. This field can be left blank.
Chapter 14 Authority Group
Chapter 8 on page
103), you can select
133
Advertisement
Table of Contents
