Configure Fxs Extensions; Figure 117 Fxs Extension: Basic; Table 50 Fxs Extension: Basic - ZyXEL Communications IP PBX X6004 User Manual

Chapter 14 Authority Group
Table 49 Add an FXS Extension
LABEL
Description
Apply
Cancel

14.3.11 Configure FXS Extensions

After you create FXS extensions you can click on the Edit button in the Authority Group
configuration screen to configure further settings associated with the extensions. The Basic
screen for an FXS extension appears as shown.

Figure 117 FXS Extension: Basic

Each field is described in the following table.

Table 50 FXS Extension: Basic

LABEL
Basic Setting
Group
Extension
Number
Interface
Web/IVR/VM PIN
Code
Department
First Name
Last Name
Description
142
DESCRIPTION
Type a brief description for this FXS extension. This field can be left blank.
Click Apply to save your changes.
Click Cancel to go back to Authority Group configuration page without saving
your changes.
DESCRIPTION
Select the authority group you want this extension to belong to.
Type the extension number for this analog phone extension.
Specify the location on the FXS interface card that the analog phone with this
extension is connected to.
Type the PIN code that this allows the person with this extension to access the
web portal, Interactive Voice Response system or Voice Mail. This value can be
up to eight alphanumeric characters and spaces are not allowed.
Type the department for this SIP extension. This field can be left blank.
Type the first name of the person this FXS extension is assigned to. This field can
be left blank.
Type the last name of the person this FXS extension is assigned to. This field can
be left blank.
Type a brief description for this SIP extension. This field can be left blank.
X6004 User's Guide