Create A New Ring Group; Edit Ring Group Description; Figure 122 Configuration > Pbx > Extension Management > Ring Group > Add; Table 52 Configuration > Pbx > Extension Management > Ring Group > Add - ZyXEL Communications IP PBX X6004 User Manual

Chapter 15 Ring Group
Table 51 Configuration > PBX > Extension Management > Ring Group
LABEL
Description
Add, Advanced,
Edit, Delete

15.2.1 Create a New Ring Group

Use this screen to create a new ring group. To access this screen, click
>
Extension Management
Figure 122 Configuration > PBX > Extension Management > Ring Group > Add
Each field is described in the following table.
Table 52 Configuration > PBX > Extension Management > Ring Group > Add
LABEL
Add Ring Group
Machine ID
Group Name
Description
Add
Cancel

15.2.2 Edit Ring Group Description

Use this screen to change the description for a ring group. To access this screen, click
Configuration
146
DESCRIPTION
This field displays the description of the ring group.
Click:
• Add - to create a new ring group.
• Advanced - to configure the settings of a ring group.
• Edit - to change the description of a ring group.
• Delete - remove an existing ring group.
>
Ring Group
DESCRIPTION
Select the ID of the X6004 on which you want to configure the ring group. This is
an internal name (not configurable) of the X6004. Only one choice is shown if you
have not configured ZyStack.
Type the name of this ring group. You can use alpha-numeric characters and
spaces are not allowed.
Type the description for this ring group. You can use alpha-numeric characters
and spaces are allowed.
Click this to save your changes.
Click this to go back to the previous screen without saving your changes.
> >
PBX Extension Management
> .
Add
> >
Ring Group
>
Configuration PBX
.
Edit
X6004 User's Guide