Lcr To Authority Group Assignment; Figure 49 Dial Condition For Long_Distance_Call Lcr; Figure 50 Configuration > Pbx > Group Management - ZyXEL Communications IP PBX X6004 User Manual

Figure 49 Dial Condition for long_distance_call LCR

4 You are done configuring the LCR. However, before it can be used by any of the phones
connected to the X6004, the LCR needs to be assigned to an appropriate authority group.

3.3.3 LCR to Authority Group Assignment

The Group Management screen allows you to give an authority group (and the extensions in
that group) the right to use an LCR (outbound dial condition). In our example, we give the
authority group Basic the right to call out using the LCR long_distance_call.
Procedure:
1 Click Configuration > PBX > Group Management to view the following screen.
Figure 50 Configuration > PBX > Group Management
2 Click the Advanced icon in the Authority Group section (in this example there is only
one authority group - Basic) of the screen to view the screen as shown. Select the
checkbox in the Advanced column of the long_distance_call LCR as shown below.
Click Apply.
X6004 User's Guide
Chapter 3 Tutorials
61