Dashboard - System Information - ZyXEL Communications IP PBX X6004 User Manual

Table 9 Navigation Panel Links (continued)
LINK
Intranet
Status
Monitor
System
Information
Status
Observation
SIP Peer
FXS Peer
FXO Peer
SIP Trunk
Logs
System Logs
CDR
Administration
Administrator
Username/
Password
Administrator
List
Diagnostics
Backup & Restore Use this screen to backup and restore the configuration or reset the X6004 to its
Firmware
Upgrade
License Control
Registration
Reboot

5.4 Dashboard - System Information

The Dashboard screen contains system information about the X6004. It is also a graphical
representation of the X6004 and any ZyStack members (if configured). Click the Dashboard
button in any of the web configurator screens to view the screen as shown.
X6004 User's Guide
DESCRIPTION
Use this screen to specify IP subnets for which the X6004 routes IP phones to a
ZyStack member.
Use this screen to check the status of peer X6004s.
These screens allow you to view the status of your X6004 or if you set up a
ZyStack you can view the status of all the participating X6004s.
Use this screen to view network configuration, hardware information, line and
license settings on the X6004.
Use these screens to view status details about extensions and outbound line
groups configured on the X6004.
Use this screen to view status information about SIP extensions configured on the
X6004.
Use this screen to view status information about FXS extensions configured on
the X6004.
Use this screen to view status information about FXO outbound line groups
configured on the X6004.
Use this screen to view status information about SIP outbound line groups
configured on the X6004.
Use these screens to view system logs, configure log settings and search the
CDR (Call Detail Record) database.
Use these screens to view and configure system logs on the X6004.
Use these screens to manage CDR collection and to query the CDR database.
Use these screens to manage administrator accounts and use diagnostic features
on the X6004.
Use this screen to change the password of the currently logged in administrator
account.
Use this screen to manage administrator accounts on the X6004.
Use this screen to configure data capture of VoIP packets for analysis.
factory defaults.
Use this screen to perform firmware upgrades on the X6004.
Use this section to make sure that your X6004 is registered with myZyXEL.com.
Use this screen to register your X6004 with myZyXEL.com. If you don't have an
account with myZyXEL.com, follow the directions in this screen to set one up.
Use this screen to reboot the X6004.
Chapter 5 The Web Configurator
79